Finished Hex Nuts - SAE J995 Grade 2 - Hot Dip Galvanized
Click to Enlarge
SAE J995 Grade 2 Hot Dip Galvanized Finished Hex Nuts are a popular and economical option for general-purpose mechanical applications where moderate strength and additional corrosion resistance is required (compared to Zinc Plated). Typically pairs with Hot Dip Galvanized ASTM A307 Grade A Bolts.
Call us at 808-834-1919 or email Sales@HawaiiNutandBolt.com with your questions, or if your project requires a size not listed below. Click on a product for additional information.
- Proof Load: 90,000 psi
- Hardness: 32 HRC max - 1/4" thru 1 1/2"
Call us at 808-834-1919 or email Sales@HawaiiNutandBolt.com with your questions, or if your project requires a size not listed below. Click on a product for additional information.
Notes: The information presented above is believed to be accurate at the time of preparation. However, Hawaii Nut & Bolt, Inc. (HNB) will not be responsible for any claim traceable to any errors, typographical or otherwise. The contents are intended to be used for reference purposes only and should not be used as a substitute for data contained within the source specifications. Appropriate expert advice should be obtained to ensure the accuracy of the information contained herein. HNB disclaims all warranties, express or implied, including merchantability and/or fitness of purpose and reliance on the information for any purpose, by anyone, is at the sole risk of that person.
